Emperor® 1/8″ heavy duty hangers are an economical version, with a slightly reduced weight capacity. Their patented system pulls tight, locks in place and when used as directed, will never break, slip or rust. Heat and cold resistant. 8 feet of braided polypropylene rope. Carabiner clips provide secure hold. Great
This is a precision instrument used to measure luminance (footcandles). The meter is fully cosine corrected for the angular incidence of light, meaning that if you are not holding the sensor perfectly perpendicular to the light source, the sensor will still read the light correctly. The sensor is stable and
SunBlaster Universal T5 Stand The Universal T5 Stand allows you to set the exact lighting height to get your seedlings or fresh cuttings off to their best starts ever. Achieving the optimum 3” – 6″ lighting distance from the plant canopy is now a breeze. Simple O-Ring adjustment makes setting
Rising Sun adjustable light hangers allow the user to lower or raise their reflector in one simple motion. The tension mechanism will maintain the desired height of the hood once in place.
Lamp cords can either come in 16/3 or 14/3 gauge wire. They can be a length of 12′,15′ or up to 25 feet for electronic ballasts. Some lamp cords come with bare wires on either end to be used in whichever fixture needed. Lamp cords can also be ordered with
This female receptacle may be wired up to devices such as reflectors for ease of connection between a electronic ballast. Allows for quick installation and uninstalling. 14/3 gauge wire.
This male receptacle may be wired up to magnetic ballasts for devices such as reflectors made specifically for electronic ballasts so they may be used with a proper connection. 14/3 gauge wire.
Power cords allow the current to run to ballasts to operate at either 120V or 240V. Most houses and power systems are designed to operate at 120V and for that reason most ballasts come packaged with a 120V cord can be used with the majority of power sources. It plugs
The all new LightRail 4.0 AdjustaDrive is the newest linear light mover available from Gualala Robotics Inc. With both a 0 to 60 second adjustable time delay for promoting even growth from end to end, and a two to four feet per minute adjustable speed control that covers a wide
LightRail two meter Rails (6 feet 6 inches). They work with LightRail 3.5 and 4.0 as well as the older LightRail 3.0 and will handle the heaviest reflectors (75 lbs) when mounted continuously along the rail to a board, or as much as 35 lbs mounted only from each end.
LightRail 5 Commercial Drive 4 rpm. Capable of moving 2 or 3 lights side by side or fore and aft per cross bar. Extruded aluminum track, wide and stable carriage with steal bearings, 4 rpm instrument grade drive motor. It comes with LR5.0 Drive Motor, crossbar, instructions, mounting hardware and a 2
Tie Boss pulleys have a great name in regards to their high quality products. 1/4″ pulley has a maximum load limit of 150 lbs. Has 8 feet of solid braid, polypropylene rope with two heavy duty hooks for all your hanging needs within the garden. Great for hanging small to medium
These ballasts are voltage specific and must be operated on correct input voltage 120 or 240 volts Some ballasts operate on either 120 or 240 volts. Electronic ballasts are protected from voltage surges by an external fuse system. This fuse is located under the input cord receptacle. Check this fuse
Capacitors for magnetic ballasts are an electronic device that are used to store electrical energy. When needed, capacitors dispel electrical current to the device, such as a magnetic transformer.
